PipologyPlumber in Toronto, the GTA & Ontario Call 416-710-4030

What to Do When a Pipe Bursts in Toronto (Step-by-Step)

A burst pipe can release hundreds of litres of water into your home in a matter of minutes. In Toronto, the most common cause is a frozen pipe in winter: water inside the pipe freezes, expands, and splits the pipe — often in an exterior wall, an unheated basement, or a crawl space. Corrosion in older homes and sudden pressure spikes cause the rest.

The good news is that the first few minutes are the ones that matter most, and you can handle them yourself. Stay calm, work through the steps below in order, and call a plumber as soon as the water is off.

Step 1: Shut off the main water valve

This is the single most important thing you can do. Every second the water stays on, more damage is done.

In most Toronto homes, the main shut-off valve is in the basement, on the wall facing the street, near where the water line enters the house — usually close to the water meter. It is either a round wheel (turn it clockwise until it stops) or a lever handle (turn it so it sits across the pipe, at a right angle to it).

If the valve is stiff or seized from years of not being used, do not force it hard enough to break it — try a firm, steady turn, and if it will not move, call a plumber right away. It is worth finding this valve before an emergency ever happens: walk down to your basement today, locate it, and make sure everyone in the household knows where it is.

Tip: If you cannot find the main valve or it will not close, call Pipology at 416-710-4030 and tell us — we can talk you through it while help is on the way.

Step 2: Turn off the electricity if water is near power

Water and electricity are a dangerous combination. If water is pooling near outlets, appliances, or your electrical panel, switch off the power to the affected area at the breaker panel — but only if you can reach the panel without walking through standing water. Never step into water that could be in contact with a live outlet or appliance.

If the electrical panel itself is wet, or you are unsure, leave the power alone and stay out of the water. Call an electrician as well as a plumber in that case.

Step 3: Open the taps to drain the pipes

Once the main valve is closed, open the cold-water taps on the lowest floor of the house and let them run until the water stops. Then open the hot-water taps as well. Flush the toilets once. This drains the remaining water out of the pipes and takes the pressure off the damaged section, which slows or stops the leak at the break.

Step 4: Contain the water and protect your belongings

Use buckets, towels, and mops to contain the water and keep it from spreading to other rooms. Move rugs, furniture, electronics, and anything valuable out of the wet area. If water is coming through a ceiling, place a bucket underneath and, if it is safe to do so, poke a small hole in the bulging drywall with a screwdriver so the water drains in one controlled spot instead of collapsing a whole section of ceiling.

Step 5: Document the damage for insurance

Before you clean up too much, take photos and video of everything: the burst pipe, the water, and every damaged item and surface. This is what your insurance company will ask for. Keep receipts for any emergency repairs, drying equipment, or temporary accommodation. Most Ontario home insurance policies cover sudden and accidental water damage from a burst pipe, but they usually do not cover damage from a leak that was left unrepaired for a long time — which is another reason to act fast.

Contact your insurer early, even before the plumber arrives, so you know what they need from you and whether they want to send an adjuster.

Step 6: Call a plumber

With the water off and the damage documented, call a plumber. When you call, it helps to say:

That information lets the plumber arrive with the right parts and fix the problem in one visit whenever possible.

Toronto-specific: is the leak on the city side?

Not every water leak in a Toronto home is the homeowner's pipe. If water is coming up from the ground outside, pooling in the street or on your front lawn, or running from the area between the street and your house, the break may be in the city's water main or the city-owned portion of the service line. In that case, call 311 to report it to Toronto Water — they handle water mains and the city side of the service line, and they will send a crew.

As a rough rule: the section of the water service line from the street to your property line is the city's responsibility; the section from the property line into your house is yours. If you are not sure which side the leak is on, call 311 and a plumber — both can help you figure it out.

Toronto's winters also make frozen pipes a regular problem here. Pipes in exterior walls, garages, and unheated basements are the most vulnerable, especially during the cold snaps in January and February. And if water is coming up through a floor drain during a storm rather than spraying from a pipe, that is a different problem — a sewer backup or a blocked drain — and it needs a different fix.

What not to do

What a plumber does when they arrive

A burst-pipe call usually goes like this. The plumber finds the break and checks whether the main valve is holding. They drain the affected section, then cut out the damaged length of pipe and replace it — with copper, PEX, or the matching material — using proper fittings. The repair is then pressure-tested before the water is turned back on. A good plumber will also check the pipes nearby, because the same freeze or corrosion that split one section may have weakened others, and will advise you on drying out the area and preventing a repeat.

Most straightforward burst-pipe repairs are completed in a single visit. Larger jobs — a burst inside a finished wall or ceiling, or multiple damaged sections — may take longer and need drywall work afterward.

How to prevent a burst pipe

Frequently asked questions

How much water can a burst pipe release?

A lot. A single burst pipe can release hundreds of litres per hour — a 3/4-inch line at normal household pressure can fill a bathtub in minutes. That is why shutting off the main valve first is so important.

Will my home insurance cover a burst pipe?

Most Ontario home insurance policies cover sudden and accidental water damage, which includes a burst pipe. Damage from a slow leak that went unrepaired for a long time is usually not covered. Check your policy and call your insurer as soon as possible.

How long does a burst-pipe repair take?

A straightforward repair on an accessible pipe is usually done in one visit, often within a couple of hours. Repairs inside finished walls or ceilings take longer because of the access and restoration work involved.

Can I use the water again right after the repair?

Once the plumber has pressure-tested the repair and turned the water back on, yes. Run the taps briefly to clear air from the lines. If the water looks discoloured at first, let it run until it clears — that is normal after a repair.

Burst pipe in Toronto? Call now.

Pipology handles emergency burst-pipe repairs across Toronto, the GTA and Ontario — residential, commercial, and service plumbing.

Call 416-710-4030

Or email [email protected]